Welcome to the Shop Talk Forum, a place where woodworker's like yourself can share ideas and discuss all things "woodworking" with other woodworker's. This is a family owned and operated business dedicated to quality and service.

Here we are all about wood and the art of woodworking.

Laney Shaughnessy,
Owner & Craftsman



Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Summers Woodworking

Pages: [1]
1
Woodworking Jigs / Re: Pencil box
« on: September 10, 2012, 04:30:10 pm »
Now that was real entertaining. I am still laughing!

2
Woodworking Tips / Tricks / How To Fix A Not So Good Miter Joint
« on: August 06, 2012, 07:45:10 pm »
What you need is Wood Glue, Screwdriver, and 200 grit Sandpaper. Carefully widen joint a bit and on the outside corner of joint rub wood glue into joint and use the round long side of screwdriver to rub the two pieces together for a couple of minutes Then when glue gets tacky... start sanding the outside of miter joint to allow the dust to mix with glue, and wolla you will never see the wide open joint no longer. :o

3
Woodworking Tips / Tricks / Marking Where Your Table Saw Blade Cuts
« on: August 06, 2012, 07:21:02 pm »
Tip from Laney Shaugnessy! Use a Sharpie Marker Ruler or Square, and mark on the table saw where the blade makes its' cuts on each side of the blade so you know where the cut begins. :o

4
Woodworking Tips / Tricks / Band Saw zero Clearance Insert Plate
« on: August 06, 2012, 07:16:55 pm »
Hey folks did you know you can make a zero clearance insert plate for your bandsaw by using a business card or old credit card and some tape. Just cut half way in the center of the card and tape the ends wolla!

5
Woodworking Tips / Tricks / Glue Brush
« on: August 06, 2012, 07:12:17 pm »
As a lot of us know already but some may not know. You can use a silicone basting brush to apply wood glue. Just cut the brush in half so it doesn't soak up to much glue. You can buy these silicone brushes almost anywhere. The great thing about using these brushes is when the glue dries on the brush you can just quickly peel it from the bristles. :o

6
Excellent tip! I will use this for sure! ::)

7
Woodworking Tips / Tricks / Re: A great way to get Free wood
« on: June 26, 2012, 05:11:48 pm »
What great information. I will definitely give it a try. Thanks!!!

8
Woodworking Tips / Tricks / Re: Use a Painter's Hook for Finishing
« on: June 26, 2012, 04:13:47 pm »
Heck yeah that works!

Pages: [1]