Welcome to the Shop Talk Forum, a place where woodworker's like yourself can share ideas and discuss all things "woodworking" with other woodworker's. This is a family owned and operated business dedicated to quality and service.

Here we are all about wood and the art of woodworking.

Laney Shaughnessy,
Owner & Craftsman



Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Projects / Re: First project
« Last post by Dirk_Relhoh on August 19, 2012, 01:47:53 am »
I know what you mean. That's the reason, why I used some ajustable legs for the little cabinet. Even if you get it straight on a flat surface, it could wobble in the tiled floor.
22
Projects / Re: First project
« Last post by LRTX1 on August 18, 2012, 06:49:21 pm »
Dirk,

The end tables turned out to be harder to build than the coffee table itself.  Had a hard time getting the tops leveled and the tables from wobbling.  I was about ready to put a book of matches under one of the legs....but I got it all worked out.  They are finished and was planning on putting them in the house this weekend.  I will take some pics tommorrow of the set in good light.  Overall it was a good project and im pleased with the outcome.  Thank you for your interest in my project.
23
Projects / Re: First project
« Last post by Dirk_Relhoh on August 18, 2012, 11:26:24 am »
What about your end tables? any pictures?
24
Projects / Re: my last projects
« Last post by Dirk_Relhoh on August 18, 2012, 11:24:50 am »
another picture
25
Projects / Re: my last projects
« Last post by Dirk_Relhoh on August 18, 2012, 11:22:47 am »
Here is the latest project.

I build a cabinet for the guest toilet. It is made out of 19 mm bamboo. I applied linseed oil as a finish.

Regards
 Dirk
26
Woodworking Tips / Tricks / Re: Marking Where Your Table Saw Blade Cuts
« Last post by Wood_Jedi on August 17, 2012, 12:14:20 pm »
Another excellent tip.. Keep em coming!
27
Woodworking Tips / Tricks / Re: How To Fix A Not So Good Miter Joint
« Last post by Wood_Jedi on August 17, 2012, 12:13:28 pm »
Excellent Tip! Thank you for posting!
28
General Discussion / Re: New Here
« Last post by Wood_Jedi on August 17, 2012, 12:12:17 pm »
Hello Bideri Welcome to the Shop Talk Forum. I look forward to interacting with you and your posts.

Laney Shaughnessy
AKA Wood_Jedi
Owner
29
General Discussion / Re: New Here
« Last post by Bideri on August 17, 2012, 05:37:32 am »
Iam Bideri , new to this one . Hope to have more sites like this and wish to b an informative and suggestive one to the people around.
low carb dessert
30
Woodworking Tips / Tricks / How To Fix A Not So Good Miter Joint
« Last post by Summers Woodworking on August 06, 2012, 07:45:10 pm »
What you need is Wood Glue, Screwdriver, and 200 grit Sandpaper. Carefully widen joint a bit and on the outside corner of joint rub wood glue into joint and use the round long side of screwdriver to rub the two pieces together for a couple of minutes Then when glue gets tacky... start sanding the outside of miter joint to allow the dust to mix with glue, and wolla you will never see the wide open joint no longer. :o
Pages: 1 2 [3] 4 5 ... 10