Welcome to the Shop Talk Forum, a place where woodworker's like yourself can share ideas and discuss all things "woodworking" with other woodworker's. This is a family owned and operated business dedicated to quality and service.

Here we are all about wood and the art of woodworking.

Laney Shaughnessy,
Owner & Craftsman

Author Topic: How To Fix A Not So Good Miter Joint  (Read 952 times)

Summers Woodworking

  • Jr. Member
  • **
  • Posts: 8
  • Location: Arenas Valley, NM
    • View Profile
    • Summers Woodworking
How To Fix A Not So Good Miter Joint
« on: August 06, 2012, 07:45:10 pm »
What you need is Wood Glue, Screwdriver, and 200 grit Sandpaper. Carefully widen joint a bit and on the outside corner of joint rub wood glue into joint and use the round long side of screwdriver to rub the two pieces together for a couple of minutes Then when glue gets tacky... start sanding the outside of miter joint to allow the dust to mix with glue, and wolla you will never see the wide open joint no longer. :o

Share on Facebook Share on Twitter


  • A Simple Design of Ocala
  • Administrator
  • Full Member
  • *****
  • Posts: 73
  • Location: Ocala, Florida
    • View Profile
    • A Simple Design of Ocala
Re: How To Fix A Not So Good Miter Joint
« Reply #1 on: August 17, 2012, 12:13:28 pm »
Excellent Tip! Thank you for posting!
Wood_Jedi aka
Laney Shaughnessy, Craftsman